create_parametric_fin_heat_sink#

Icepak.create_parametric_fin_heat_sink(hs_height=100, hs_width=100, hs_basethick=10, pitch=20, thick=10, length=40, height=40, draftangle=0, patternangle=10, separation=5, symmetric=True, symmetric_separation=20, numcolumn_perside=2, vertical_separation=10, material='Al-Extruded', center=[0, 0, 0], plane_enum=0, rotation=0, tolerance=0.001)[source]#

Create a parametric heat sink.

Parameters:

hs_heightint, optional: Height of the heat sink. The default is 100.
hs_widthint, optional: Width of the heat sink. The default is 100.
hs_basethickint, optional: Thickness of the heat sink base. The default is 10.
pitchoptional: Pitch of the heat sink. The default is 10.
thickoptional: Thickness of the heat sink. The default is 10.
lengthoptional: Length of the heat sink. The default is 40.
heightoptional: Height of the heat sink. The default is 40.
draftangleint, float, optional: Draft angle in degrees. The default is 0.
patternangleint, float, optional: Pattern angle in degrees. The default is 10.
separationoptional: The default is 5.
symmetricbool, optional: Whether the heat sink is symmetric. The default is True.
symmetric_separationoptional: The default is 20.
numcolumn_persideint, optional: Number of columns per side. The default is 2.
vertical_separationoptional: The default is 10.
materialstr, optional: Name of the material. The default is Al-Extruded.
centerlist, optional: List of [x, y, z] coordinates for the center of the heatsink. The default is [0, 0, 0].
plane_enumstr, int, optional: Plane for orienting the heat sink. ansys.aedt.core.constants.PLANE Enumerator can be used as input. The default is 0.
rotationint, float, optional: The default is 0.
toleranceint, float, optional: Tolerance value. The default is 0.001.

Returns:

bool: True when successful, False when failed.

Examples

Create a symmetric fin heat sink.

>>> from ansys.aedt.core import Icepak
>>> icepak = Icepak()
>>> icepak.insert_design("Heat_Sink_Example")
>>> icepak.create_parametric_fin_heat_sink(draftangle=1.5, patternangle=8, numcolumn_perside=3,
...                                        vertical_separation=5.5, material="Steel", center=[10, 0, 0],
...                                        plane_enum=icepak.PLANE.XY, rotation=45, tolerance=0.005)