add_subcircuit_dynamic_link

NexximComponents.add_subcircuit_dynamic_link(pyaedt_app=None, solution_name=None, extrusion_length=None, enable_cable_modeling=True, default_matrix='Original', tline_port='', name=None)

Add a subcircuit from HFSS, Q3d or 2D Extractor in circuit design.

Parameters:

pyaedt_appansys.aedt.core.q3d.Q3d or ansys.aedt.core.q3d.Q2d or

ansys.aedt.core.q3d.Hfss. pyaedt application object to include. It could be an Hfss object, a Q3d object or a Q2d.

solution_namestr, optional

Name of the solution and sweep. The default is "Setup1 : Sweep".

extrusion_lengthfloat, str, optional

Extrusion length for 2D Models (q2d or Hfss) in model units. Default is None.

enable_cable_modelingbool, optional

Either if the Hfss Cable modeling has to be enabled for 2D subcircuits.

default_matrixstr, optional

Matrix to link to the subcircuit. Default to “Original”. It only applies to 2D Extractor and Q3D.

tline_portstr, optional

Port to be used for tramsission line. Only applies to Hfss.

namestr, optional

Component name.

Returns:

ansys.aedt.core.modeler.circuits.object_3d_circuit.CircuitComponent

Circuit Component Object.

References

>>> oModelManager.Add
>>> oComponentManager.Add
>>> oDesign.AddCompInstance
>>> oDesign.AddDynamicLink