edit_external_circuit

Maxwell2d.edit_external_circuit(netlist_file_path, schematic_design_name=None, parameters=None)

Edit the external circuit for the winding and allow editing of the circuit parameters.

Parameters:

netlist_file_pathstr

Path to the circuit netlist file.

schematic_design_namestr, optional

Name of the schematic design.

parametersdict, optional

Name and value of the circuit parameters. Parameters must be provided as a dictionary, where the key is the parameter name and the value is the parameter value. If the dictionary is provided, the netlist_file_path parameter is automatically set to an empty string. The default is None.

Returns:

bool

True when successful, False when failed.

References

>>> oboundary.EditExternalCircuit

Examples

After creating a Maxwell circuit, export the netlist file and then import it to Maxwell 2D.

>>> from ansys.aedt.core import Maxwell2d
>>> m2d = Maxwell2d(solution_type="Transient")
>>> coil = m2d.modeler.create_circle([0, 0, 0], 10, name="Coil1")
>>> m2d.assign_winding(assignment=[coil.name], winding_type="External", name="Winding1")
>>> # Create a Maxwell circuit.
>>> circuit = m2d.create_external_circuit(circuit_design="circuit_maxwell")
>>> windings = [
>>>              circuit.modeler.schematic.components[k]
>>>              for k in list(circuit.modeler.schematic.components.keys())
>>>              if circuit.modeler.schematic.components[k].parameters["Info"] == "Winding"
>>>            ]
>>> circuit.modeler.schematic_units = "mil"
>>> r = circuit.modeler.schematic.create_resistor(name="R", value="1Ohm", location=[1000, 0])
>>> v = circuit.modeler.schematic.create_component(component_library="Sources",
>>>                                                component_name="VSin",
>>>                                                location=[2000, -1000],
>>>                                                angle=0)
>>> g = circuit.modeler.schematic.create_gnd([2000, -1300], angle=0)
>>> windings[0].pins[1].connect_to_component(r.pins[0], use_wire=True)
>>> r.pins[1].connect_to_component(v.pins[1], use_wire=True)
>>> windings[0].pins[0].connect_to_component(v.pins[0], use_wire=True)
>>> # Define the path where to export the netlist and import it in Maxwell 2D.
>>> netlist_path = "C:\Users\netlist.sph"
>>> circuit.export_netlist_from_schematic(output_file=netlist_path)
>>> m2d.edit_external_circuit(netlist_file_path=netlist_path, schematic_design_name="circuit_maxwell")
>>> m2d.release_desktop(True, True)