edit_source#

Hfss.edit_source(assignment=None, power='1W', phase='0deg')[source]#

Set up the power loaded for HFSS postprocessing.

Parameters:

assignmentstr, optional: Port name and mode. For example, "Port1:1". The port name must be defined if the solution type is other than Eigenmodal. This parameter is ignored if the solution type is Eigenmodal.
powerstr, optional: Power in watts (W) or the project variable to put as stored energy in the project. The default is "1W".
phasestr, optional: Phase of the excitation. The default is "0deg".

Returns:

bool: True when successful, False when failed.

References

>>> oModule.EditSources

Examples

Create a circle sheet and use it to create a wave port. Set up the thermal power for this wave port.

>>> sheet = hfss.modeler.create_circle(hfss.PLANE.YZ,
...                                    [-20, 0, 0], 10,
...                                    name="sheet_for_source")
>>> hfss.solution_type = "Modal"
>>> wave_port = hfss.create_wave_port_from_sheet(sheet,5,hfss.AxisDir.XNeg,40,2,"SheetWavePort",True)
>>> hfss.edit_source("SheetWavePort" + ":1","10W")
PyAEDT INFO: Setting up power to "SheetWavePort:1" = 10W
True