create_report#

PostProcessor.create_report(expressions=None, setup_sweep_name=None, domain='Sweep', variations=None, primary_sweep_variable=None, secondary_sweep_variable=None, report_category=None, plot_type='Rectangular Plot', context=None, subdesign_id=None, polyline_points=1001, plot_name=None)[source]#

Create a report in AEDT. It can be a 2D plot, 3D plot, polar plot, or a data table.

Parameters:

expressionsstr or list, optional

One or more formulas to add to the report. Example is value = "dB(S(1,1))".

setup_sweep_namestr, optional

Setup name with the sweep. The default is "".

domainstr, optional

Plot Domain. Options are “Sweep”, “Time”, “DCIR”.

variationsdict, optional

Dictionary of all families including the primary sweep. The default is {"Freq": ["All"]}.

primary_sweep_variablestr, optional

Name of the primary sweep. The default is "Freq".

secondary_sweep_variablestr, optional

Name of the secondary sweep variable in 3D Plots.

report_categorystr, optional

Category of the Report to be created. If None default data Report is used. The Report Category can be one of the types available for creating a report depend on the simulation setup. For example for a Far Field Plot in HFSS the UI shows the report category as “Create Far Fields Report”. The report category is “Far Fields” in this case. Depending on the setup different categories are available. If None default category is used (the first item in the Results drop down menu in AEDT).

plot_typestr, optional

The format of Data Visualization. Default is Rectangular Plot.

contextstr, dict, optional

The default is None. - For HFSS 3D Layout, options are "Bondwires", "Differential Pairs",

None, "Probes", "RL", "Sources", and "Vias".

For Q2D or Q3D, specify the name of a reduced matrix.
For a far fields plot, specify the name of an infinite sphere.
For Maxwell 2D/3D Eddy Current solution types this can be provided as a dictionary

where the key is the matrix name and value the reduced matrix.

plot_namestr, optional

Name of the plot. The default is None.

polyline_pointsint, optional,

Number of points to create the report for plots on polylines on.

subdesign_idint, optional

Specify a subdesign ID to export a Touchstone file of this subdesign. Valid for Circuit Only. The default value is None.

Returns:

ansys.aedt.core.modules.report_templates.Standard: True when successful, False when failed.

References

>>> oModule.CreateReport

Examples

>>> from ansys.aedt.core import Hfss
>>> hfss = Hfss()
>>> hfss.post.create_report("dB(S(1,1))")
>>> variations = hfss.available_variations.nominal_w_values_dict
>>> variations["Theta"] = ["All"]
>>> variations["Phi"] = ["All"]
>>> variations["Freq"] = ["30GHz"]
>>> hfss.post.create_report(expressions="db(GainTotal)",
...                            setup_sweep_name=hfss.nominal_adaptive,
...                            variations=variations,
...                            primary_sweep_variable="Phi",
...                            secondary_sweep_variable="Theta",
...                            report_category="Far Fields",
...                            plot_type="3D Polar Plot",
...                            context="3D")
>>> hfss.post.create_report("S(1,1)",hfss.nominal_sweep,variations=variations,plot_type="Smith Chart")
>>> hfss.release_desktop(False, False)

>>> from ansys.aedt.core import Maxwell2d
>>> m2d = Maxwell2d()
>>> m2d.post.create_report(expressions="InputCurrent(PHA)",
...                               domain="Time",
...                               primary_sweep_variable="Time",
...                               plot_name="Winding Plot 1")
>>> m2d.release_desktop(False, False)

>>> from ansys.aedt.core import Maxwell3d
>>> m3d = Maxwell3d(solution_type="EddyCurrent")
>>> rectangle1 = m3d.modeler.create_rectangle(0, [0.5, 1.5, 0], [2.5, 5], name="Sheet1")
>>> rectangle2 = m3d.modeler.create_rectangle(0, [9, 1.5, 0], [2.5, 5], name="Sheet2")
>>> rectangle3 = m3d.modeler.create_rectangle(0, [16.5, 1.5, 0], [2.5, 5], name="Sheet3")
>>> m3d.assign_current(rectangle1.faces[0], amplitude=1, name="Cur1")
>>> m3d.assign_current(rectangle2.faces[0], amplitude=1, name="Cur2")
>>> m3d.assign_current(rectangle3.faces[0], amplitude=1, name="Cur3")
>>> L = m3d.assign_matrix(assignment=["Cur1", "Cur2", "Cur3"], matrix_name="Matrix1")
>>> out = L.join_series(sources=["Cur1", "Cur2"], matrix_name="ReducedMatrix1")
>>> expressions = m3d.post.available_report_quantities(report_category="EddyCurrent",
...                                                    display_type="Data Table",
...                                                    context={"Matrix1": "ReducedMatrix1"})
>>> report = m3d.post.create_report(
...    expressions=expressions,
...    context={"Matrix1": "ReducedMatrix1"},
...    plot_type="Data Table",
...    plot_name="reduced_matrix")
>>> m3d.release_desktop(False, False)