assign_rotate_motion#

Maxwell2d.assign_rotate_motion(assignment, coordinate_system='Global', axis='Z', positive_movement=True, start_position=0, has_rotation_limits=True, negative_limit=0, positive_limit=360, non_cylindrical=False, mechanical_transient=False, angular_velocity='0rpm', inertia='1', damping=0, load_torque='0newton')[source]#

Assign a rotation motion to an object container.

For both rotational and translational problems, the band objects must always enclose all the moving objects.

Parameters:

assignmentstr,: Object container.
coordinate_systemstr, optional: Coordinate system name. The default is "Global".
axisstr or int, optional: Coordinate system axis. The default is "Z". It can be a ansys.aedt.core.generic.constants.AXIS enumerator value.
positive_movementbool, optional: Whether the movement is positive. The default is True.
start_positionfloat or str, optional: Starting position of the movement. The default is 0. If a float value is used, “deg” units are applied.
has_rotation_limitsbool, optional: Whether there is a limit in rotation. The default is False.
negative_limitfloat or str, optional: Negative limit of the movement. The default is 0. If a float value is used, “deg” units are applied.
positive_limitfloat or str, optional: Positive limit of the movement. The default is 360. If a float value is used, “deg” units are applied.
non_cylindricalbool, optional: Whether to consider non-cylindrical rotation. The default is False.
angular_velocityfloat or str, optional: Movement velocity. The default is "0rpm". If a float value is used, “rpm” units are applied.
mechanical_transientbool, optional: Whether to consider mechanical movement. The default is False.
inertiafloat, optional: Mechanical inertia. The default is 1.
dampingfloat, optional: Damping factor. The default is 0.
load_torquefloat or str, optional: Load torque sign is determined based on the moving vector, using the right-hand rule. The default is "0NewtonMeter". If a float value is used “NewtonMeter” units are applied.

Returns:

ansys.aedt.core.modules.boundary.BoundaryObject: Boundary object.

References

>>> oModule.AssignBand