EDB: geometry creation

This example shows how to 1, Create a parameterized PCB layout design. 2, Place 3D component on PCB. 3, Create HFSS setup and frequency sweep with a mesh operation. 4, Create return loss plot

Final expected project

---

Create parameterized PCB

Initialize an empty EDB layout object on version 2023 R2.

---

import os
import numpy as np
import pyaedt

ansys_version = "2023.2"

aedb_path = os.path.join(pyaedt.generate_unique_folder_name(), pyaedt.generate_unique_name("pcb") + ".aedb")
edb = pyaedt.Edb(edbpath=aedb_path, edbversion=ansys_version)
print("EDB is located at {}".format(aedb_path))

EDB is located at D:\Temp\pyaedt_prj_BSH\pcb_GV8PZC.aedb

Create FR4 material

edb.materials.add_dielectric_material("ANSYS_FR4", 3.5, 0.005)

################
# Create stackup
# ~~~~~~~~~~~~~~
# A stackup can be created by importing from a csv/xml file or adding layer by layer.
#

edb.add_design_variable("$DIEL_T", "0.15mm")
edb.stackup.add_layer("BOT")
edb.stackup.add_layer("D5", "GND", layer_type="dielectric", thickness="$DIEL_T", material="ANSYS_FR4")
edb.stackup.add_layer("L5", "Diel", thickness="0.05mm")
edb.stackup.add_layer("D4", "GND", layer_type="dielectric", thickness="$DIEL_T", material="ANSYS_FR4")
edb.stackup.add_layer("L4", "Diel", thickness="0.05mm")
edb.stackup.add_layer("D3", "GND", layer_type="dielectric", thickness="$DIEL_T", material="ANSYS_FR4")
edb.stackup.add_layer("L3", "Diel", thickness="0.05mm")
edb.stackup.add_layer("D2", "GND", layer_type="dielectric", thickness="$DIEL_T", material="ANSYS_FR4")
edb.stackup.add_layer("L2", "Diel", thickness="0.05mm")
edb.stackup.add_layer("D1", "GND", layer_type="dielectric", thickness="$DIEL_T", material="ANSYS_FR4")
edb.stackup.add_layer("TOP", "Diel", thickness="0.05mm")

<pyaedt.edb_core.edb_data.layer_data.StackupLayerEdbClass object at 0x0000022C8D9AD4E0>

Create ground planes

edb.add_design_variable("PCB_W", "20mm")
edb.add_design_variable("PCB_L", "20mm")

gnd_dict = {}
for layer_name in edb.stackup.signal_layers.keys():
    gnd_dict[layer_name] = edb.modeler.create_rectangle(layer_name, "GND", [0, "PCB_W/-2"], ["PCB_L", "PCB_W/2"])

###################
# Create signal net
# ~~~~~~~~~~~~~~~~~
# Create signal net on layer 3, and add clearance to the ground plane.

edb.add_design_variable("SIG_L", "10mm")
edb.add_design_variable("SIG_W", "0.1mm")
edb.add_design_variable("SIG_C", "0.3mm")

signal_path = (["5mm", 0], ["SIG_L+5mm", 0])
signal_trace = edb.modeler.create_trace(signal_path, "L3", "SIG_W", "SIG", "Flat", "Flat")

signal_path = (["5mm", 0], ["PCB_L", 0])
clr = edb.modeler.create_trace(signal_path, "L3", "SIG_C*2+SIG_W", "SIG", "Flat", "Flat")
gnd_dict["L3"].add_void(clr)

True

Create signal vias

Create via padstack definition. Place the signal vias.

edb.add_design_variable("SG_VIA_D", "1mm")

edb.add_design_variable("$VIA_AP_D", "1.2mm")

edb.padstacks.create("ANSYS_VIA", "0.3mm", "0.5mm", "$VIA_AP_D")

edb.padstacks.place(["5mm", 0], "ANSYS_VIA", "SIG")

<pyaedt.edb_core.edb_data.padstacks_data.EDBPadstackInstance object at 0x0000022CF70A85E0>

Create ground vias around signal via

for i in np.arange(30, 331, 30):
    px = np.cos(i / 180 * np.pi)
    py = np.sin(i / 180 * np.pi)
    edb.padstacks.place(["{}*{}+5mm".format("SG_VIA_D", px), "{}*{}".format("SG_VIA_D", py)], "ANSYS_VIA", "GND")

Create ground vias along signal trace

for i in np.arange(2e-3, edb.variables["SIG_L"].value - 2e-3, 2e-3):
    edb.padstacks.place(["{}+5mm".format(i), "1mm"], "ANSYS_VIA", "GND")
    edb.padstacks.place(["{}+5mm".format(i), "-1mm"], "ANSYS_VIA", "GND")

Create a wave port at the end of the signal trace

signal_trace.create_edge_port("port_1", "End", "Wave", horizontal_extent_factor=10)

##################
# Set hfss options
# ~~~~~~~~~~~~~~~~

edb.design_options.antipads_always_on = True
edb.hfss.hfss_extent_info.air_box_horizontal_extent = 0.01
edb.hfss.hfss_extent_info.air_box_positive_vertical_extent = 2
edb.hfss.hfss_extent_info.air_box_negative_vertical_extent = 2

##############
# Create setup
# ~~~~~~~~~~~~

setup = edb.create_hfss_setup("Setup1")
setup.set_solution_single_frequency("5GHz", max_num_passes=2, max_delta_s="0.01")
setup.hfss_solver_settings.order_basis = "first"

Add mesh operation to setup

edb.setups["Setup1"].add_length_mesh_operation({"SIG": ["L3"]}, "m1", max_length="0.1mm")

<pyaedt.edb_core.edb_data.hfss_simulation_setup_data.MeshOperationLength object at 0x0000022CF70AA800>

Add frequency sweep to setup

setup.add_frequency_sweep(
    "Sweep1",
    frequency_sweep=[
        ["linear count", "0", "1KHz", 1],
        ["log scale", "1KHz", "0.1GHz", 10],
        ["linear scale", "0.1GHz", "5GHz", "0.1GHz"],
    ],
)

<pyaedt.edb_core.edb_data.simulation_setup.EdbFrequencySweep object at 0x0000022CF70A85E0>

Save and close EDB

edb.save_edb()
edb.close_edb()

True

Launch Hfss3dLayout

h3d = pyaedt.Hfss3dLayout(aedb_path, specified_version=ansys_version, new_desktop_session=True)

Initializing new desktop!

Place 3D component

component3d = pyaedt.downloads.download_file("component_3d", "SMA_RF_SURFACE_MOUNT.a3dcomp",)

comp = h3d.modeler.place_3d_component(
    component_path=component3d, number_of_terminals=1, placement_layer="TOP", component_name="my_connector",
    pos_x="5mm", pos_y=0.000)

##########
# Analysis
# ~~~~~~~~
h3d.analyze(num_cores=4)

True

Create return loss plot

h3d.post.create_report("dB(S(port_1, port_1))")

<pyaedt.modules.report_templates.Standard object at 0x0000022CF70ABEE0>

Save and close the project

h3d.save_project()
print("Project is saved to {}".format(h3d.project_path))
h3d.release_desktop(True, True)

Project is saved to D:/Temp/pyaedt_prj_BSH/

True