EDB: Layout Components

This example shows how you can use EDB to create a layout component parametrics and use it in HFSS 3D.

Perform required imports

Perform required imports, which includes importing the Hfss3dlayout object and initializing it on version 2023 R2.

import tempfile
import pyaedt
import os

Set non-graphical mode

Set non-graphical mode. The default is False.

non_graphical = False

Creating data classes

Data classes are useful to do calculations and store variables. We create 3 Data classes for Patch, Line and Array

class Patch:
    def __init__(self, width=0.0, height=0.0, position=0.0):
        self.width = width
        self.height = height
        self.position = position

    @property
    def points(self):
        return [
            [self.position, "-{}/2".format(self.height)],
            ["{} + {}".format(self.position, self.width), "-{}/2".format(self.height)],
            ["{} + {}".format(self.position, self.width), "{}/2".format(self.height)],
            [self.position, "{}/2".format(self.height)],
        ]


class Line:
    def __init__(self, length=0.0, width=0.0, position=0.0):
        self.length = length
        self.width = width
        self.position = position

    @property
    def points(self):
        return [
            [self.position, "-{}/2".format(self.width)],
            ["{} + {}".format(self.position, self.length), "-{}/2".format(self.width)],
            ["{} + {}".format(self.position, self.length), "{}/2".format(self.width)],
            [self.position, "{}/2".format(self.width)],
        ]


class LinearArray:
    def __init__(self, nb_patch=1, array_length=10e-3, array_width=5e-3):
        self.nbpatch = nb_patch
        self.length = array_length
        self.width = array_width

    @property
    def points(self):
        return [
            [-1e-3, "-{}/2-1e-3".format(self.width)],
            ["{}+1e-3".format(self.length), "-{}/2-1e-3".format(self.width)],
            ["{}+1e-3".format(self.length), "{}/2+1e-3".format(self.width)],
            [-1e-3, "{}/2+1e-3".format(self.width)],
        ]

Launch EDB

PyAEDT.Edb allows to open existing Edb project or create a new empty project.

tmpfold = tempfile.gettempdir()
aedb_path = os.path.join(tmpfold, pyaedt.generate_unique_name("pcb") + ".aedb")
print(aedb_path)
edb = pyaedt.Edb(edbpath=aedb_path, edbversion="2023.2")

D:\Temp\pcb_4JFJT6.aedb

Add stackup layers

Add the stackup layers.

edb.stackup.add_layer("Virt_GND")
edb.stackup.add_layer("Gap", "Virt_GND", layer_type="dielectric", thickness="0.05mm", material="Air")
edb.stackup.add_layer("GND", "Gap")
edb.stackup.add_layer("Substrat", "GND", layer_type="dielectric", thickness="0.5mm", material="Duroid (tm)")
edb.stackup.add_layer("TOP", "Substrat")

<pyaedt.edb_core.edb_data.layer_data.StackupLayerEdbClass object at 0x0000022CFF7839A0>

Create linear array

Create the first patch of the linear array.

edb["w1"] = 1.4e-3
edb["h1"] = 1.2e-3
edb["initial_position"] = 0.0
edb["l1"] = 2.4e-3
edb["trace_w"] = 0.3e-3
first_patch = Patch(width="w1", height="h1", position="initial_position")
edb.modeler.create_polygon(first_patch.points, "TOP", net_name="Array_antenna")
# First line

first_line = Line(length="l1", width="trace_w", position=first_patch.width)
edb.modeler.create_polygon(first_line.points, "TOP", net_name="Array_antenna")

<pyaedt.edb_core.edb_data.primitives_data.EdbPolygon object at 0x0000022CFF783EB0>

Patch linear array

Patch the linear array.

edb["w2"] = 2.29e-3
edb["h2"] = 3.3e-3
edb["l2"] = 1.9e-3
edb["trace_w2"] = 0.2e-3

patch = Patch(width="w2", height="h2")
line = Line(length="l2", width="trace_w2")
linear_array = LinearArray(nb_patch=8, array_width=patch.height)

current_patch = 1
current_position = "{} + {}".format(first_line.position, first_line.length)

while current_patch <= linear_array.nbpatch:
    patch.position = current_position
    edb.modeler.create_polygon(patch.points, "TOP", net_name="Array_antenna")
    current_position = "{} + {}".format(current_position, patch.width)
    if current_patch < linear_array.nbpatch:
        line.position = current_position
        edb.modeler.create_polygon(line.points, "TOP", net_name="Array_antenna")
        current_position = "{} + {}".format(current_position, line.length)
    current_patch += 1

linear_array.length = current_position

Add ground

Add a ground.

edb.modeler.create_polygon(linear_array.points, "GND", net_name="GND")

<pyaedt.edb_core.edb_data.primitives_data.EdbPolygon object at 0x0000022CFBE86FE0>

Add connector pin

Add a central connector pin.

edb.padstacks.create(padstackname="Connector_pin", holediam="100um", paddiam="0", antipaddiam="200um")
con_pin = edb.padstacks.place(
    ["{}/4.0".format(first_patch.width), 0],
    "Connector_pin",
    net_name="Array_antenna",
    fromlayer="TOP",
    tolayer="GND",
    via_name="coax",
)

Add connector ground

Add a connector ground.

edb.modeler.create_polygon(first_patch.points, "Virt_GND", net_name="GND")
edb.padstacks.create("gnd_via", "100um", "0", "0")
edb["via_spacing"] = 0.2e-3
con_ref1 = edb.padstacks.place(
    ["{} + {}".format(first_patch.points[0][0], "via_spacing"), "{} + {}".format(first_patch.points[0][1], "via_spacing")],
    "gnd_via",
    fromlayer="GND",
    tolayer="Virt_GND",
    net_name="GND",
)
con_ref2 = edb.padstacks.place(
    ["{} + {}".format(first_patch.points[1][0], "-via_spacing"), "{} + {}".format(first_patch.points[1][1], "via_spacing")],
    "gnd_via",
    fromlayer="GND",
    tolayer="Virt_GND",
    net_name="GND",
)
con_ref3 = edb.padstacks.place(
    ["{} + {}".format(first_patch.points[2][0], "-via_spacing"), "{} + {}".format(first_patch.points[2][1], "-via_spacing")],
    "gnd_via",
    fromlayer="GND",
    tolayer="Virt_GND",
    net_name="GND",
)
con_ref4 = edb.padstacks.place(
    ["{} + {}".format(first_patch.points[3][0], "via_spacing"), "{} + {}".format(first_patch.points[3][1], "-via_spacing")],
    "gnd_via",
    fromlayer="GND",
    tolayer="Virt_GND",
    net_name="GND",
)

Add excitation port

Add an excitation port.

edb.padstacks.set_solderball(con_pin, "Virt_GND", isTopPlaced=False, ballDiam=0.1e-3)
port_name = edb.padstacks.create_coax_port(con_pin)

Plot geometry

Plot the geometry.

edb.nets.plot()

Save and close Edb instance prior to opening it in Electronics Desktop.

Save EDB.

edb.save_edb()
edb.close_edb()
print("EDB saved correctly to {}. You can import in AEDT.".format(aedb_path))

EDB saved correctly to D:\Temp\pcb_4JFJT6.aedb. You can import in AEDT.

Launch HFSS 3D

Launch HFSS 3D.

h3d = pyaedt.Hfss(specified_version="2023.2",new_desktop_session=True, close_on_exit=True, solution_type="Terminal")

Initializing new desktop!

Add the layout component

Hfss allows user to add Layout components (aedb) or 3D Components into a 3D Design and benefit of different functionalities like parametrization, mesh fusion and others.

component = h3d.modeler.insert_layout_component(aedb_path, parameter_mapping=True)

Edit Parameters

If a layout component is parametric, parameters can be exposed and changed in HFSS

component.parameters

w1_name = "{}_{}".format("w1", h3d.modeler.user_defined_component_names[0])
h3d[w1_name]= 0.0015

Boundaries

To run the simulation we need an airbox to which apply radiation boundaries. We don’t need to create ports because are embedded in layout component.

h3d.modeler.fit_all()


h3d.modeler.create_air_region(130,400,1000, 130,400,300)
h3d.assign_radiation_boundary_to_objects("Region")

<pyaedt.modules.Boundary.BoundaryObject object at 0x0000022CF6EAC7C0>

Create setup and sweeps

Getters and setters facilitate the settings on the nested property dictionary.

• setup.props['Frequency']="20GHz"

You can now use the simpler approach that follows.

setup = h3d.create_setup()

setup.props['Frequency']="20GHz"
setup.props['MaximumPasses'] = 2

sweep1 = setup.add_sweep()
sweep1.props["RangeStart"]="20GHz"
sweep1.props["RangeEnd"]="50GHz"
sweep1.update()

True

Solve setup and create report

Solve the project and create a report.

h3d.analyze()

True

Plot results outside AEDT

Plot results using Matplotlib.

trace = h3d.get_traces_for_plot()
solution = h3d.post.get_solution_data(trace[0])
solution.plot()

<Figure size 2000x1000 with 1 Axes>

Plot Far Fields in AEDT

Plot Radiation patterns in AEDT.

variations = {}
variations["Freq"] = ["20GHz"]
variations["Theta"] = ["All"]
variations["Phi"] = ["All"]
h3d.insert_infinite_sphere( name="3D")


new_report = h3d.post.reports_by_category.far_field("db(RealizedGainTotal)", h3d.nominal_adaptive, "3D")
new_report.variations = variations
new_report.primary_sweep = "Theta"
new_report.create("Realized2D")

True

Plot Far Fields in AEDT

Plot Radiation patterns in AEDT.

new_report.report_type = "3D Polar Plot"
new_report.secondary_sweep = "Phi"
new_report.create("Realized3D")

True

Plot Far Fields outside AEDT

Plot Radiation patterns outside AEDT.

solutions_custom = new_report.get_solution_data()
solutions_custom.plot_3d()

<Figure size 2000x1000 with 1 Axes>

Plot E Field on nets and layers

Plot E Field on nets and layers in AEDT.

h3d.post.create_fieldplot_layers_nets(
            [["TOP","Array_antenna"]],
            "Mag_E",
            intrinsics={"Freq":"20GHz", "Phase": "0deg"},
            plot_name="E_Layers",
        )

<pyaedt.modules.solutions.FieldPlot object at 0x0000022CFF7BC8B0>

Close AEDT

After the simulation completes, you can close AEDT or release it using the pyaedt.Desktop.release_desktop() method. All methods provide for saving the project before closing AEDT.

h3d.save_project(os.path.join(tmpfold, "test_layout.aedt"))
h3d.release_desktop()

True