Weave designer ============== The **Weave designer** extension generates woven glass-fiber fill geometry for PCB substrates and assigns homogenized or detailed materials to it in HFSS. The extension provides a graphical user interface for configuration, or it can be used in batch mode via command line arguments. The following image shows the extension: .. image:: ../../../_static/extensions/weave_designer_ui.png :width: 800 :alt: Weave Designer GUI Features -------- - Build a full stackup (ground planes, substrate, trace, ports, and airbox) for a microstrip or stripline, differential or single-ended, and weave the glass fiber into it in one step. - Alternatively, weave the glass fiber onto one or more existing substrate objects in a design that already contains vias and routing ("Weave existing layout" mode), without touching the stackup. - Choose a predefined vendor glass style (weave pattern, pitch, and yarn geometry) or define a fully custom one. - Configure glass/resin Dk and Df, shift and rotate the weave pattern relative to the substrate, and expose low-level facet/sector settings in an **Advanced Settings** dialog. Using the extension -------------------- 1. Open the **Automation** tab in the HFSS interface. 2. Locate and click the **Weave Designer** icon under the Extension Manager. 3. In the extension dialog, choose the **Mode**: - **Design full stackup**: build the ground/substrate/trace/ports/airbox automatically, then weave. - **Weave existing layout**: weave onto user-named, pre-existing substrate objects, picked either by typing their names or using the **Get Selection** button. 4. Select the **Line type** (Microstrip or Stripline) and whether the pair is differential. 5. Pick a **Glass style**, or choose **Custom** to edit the glass dimensions in the **Geometry** dialog. 6. Adjust Dk/Df values, shift, and rotation as needed. 7. Click **Advanced Settings** to change facet/sector if needed. .. note:: Increasing the faceting improves accuracy but slows down the model build time. 8. Click **Create Model** to generate the geometry in HFSS. Command line ------------ The extension can also be used directly via the command line for batch processing. Use the following syntax to run the extension: .. toctree:: :maxdepth: 2 ../commandline