create_edge_port_vertical

EdbHfss.create_edge_port_vertical(prim_id, point_on_edge, port_name=None, impedance=50, reference_layer=None, hfss_type='Gap', horizontal_extent_factor=5, vertical_extent_factor=3, pec_launch_width='0.01mm')

Create a vertical edge port.

Parameters:

prim_idint

Primitive ID.

point_on_edgelist

Coordinate of the point to define the edge terminal. The point must be on the target edge but not on the two ends of the edge.

port_namestr, optional

Name of the port. The default is None.

impedanceint, float, optional

Impedance of the port. The default value is 50.

reference_layerstr, optional

Reference layer of the port. The default is None.

hfss_typestr, optional

Type of the port. The default value is "Gap". Options are "Gap", "Wave".

horizontal_extent_factorint, float, optional

Horizontal extent factor. The default value is 5.

vertical_extent_factorint, float, optional

Vertical extent factor. The default value is 3.

radial_extent_factorint, float, optional

Radial extent factor. The default value is 0.

pec_launch_widthstr, optional

Launch Width of PEC. The default value is "0.01mm".

Returns

——-

str

Port name.